• WSM Top End Rebuild Kit - Kawasaki 650 1986-1996
1 1

WSM

WSM Top End Rebuild Kit - Kawasaki 650

WSM Top End Rebuild Kit - Kawasaki 650

010-810-10

In stock

$240.24
Shipping calculated at checkout.
Bore

WSM Aftermarket Top End Rebuild Kit for 1986-1996 Kawasaki 650 Engines. Kit includes Pistons, Rings and Gaskets. Bore sizes available up to 76mm.

What's Included

  • 2 x Piston
  • 2 x Piston Pin
  • 2 x Wrist Pin Bearing
  • 4 x Pin Circlip
  • 4 x Piston Ring
  • 1 x Head Gasket
  • 1 x Base Gasket
  • 2 x Exhaust Manifold Gasket
  • 1 x Headpipe Gasket
  • 1 x Carb Base Gasket Keihin 28mm
  • 1 x Carb Base Gasket Keihin 38mm

Reported to fit the following Kawasaki PWC Models:

  • 1986 Kawasaki 650 X2
  • 1987 Kawasaki 650 SX
  • 1987 Kawasaki 650 X2
  • 1988 Kawasaki 650 SX
  • 1988 Kawasaki 650 X2
  • 1989 Kawasaki 650 SX
  • 1989 Kawasaki 650 Jet Mate
  • 1989 Kawasaki 650 X2
  • 1990 Kawasaki 650 SX
  • 1990 Kawasaki 650 Jet Mate
  • 1990 Kawasaki 650 X2
  • 1991 Kawasaki 650 SX
  • 1991 Kawasaki 650 SC
  • 1991 Kawasaki 650 TS
  • 1991 Kawasaki 650 X2
  • 1992 Kawasaki 650 SX
  • 1992 Kawasaki 650 Jet Mate
  • 1992 Kawasaki 650 SC
  • 1992 Kawasaki 650 TS
  • 1992 Kawasaki 650 X2
  • 1993 Kawasaki 650 SX
  • 1993 Kawasaki 650 SC
  • 1993 Kawasaki 650 Super Sport XI
  • 1993 Kawasaki 650 TS
  • 1993 Kawasaki 650 X2
  • 1994 Kawasaki 650 SC
  • 1994 Kawasaki 650 Super Sport XI
  • 1994 Kawasaki 650 TS
  • 1994 Kawasaki 650 X2
  • 1995 Kawasaki 650 SC
  • 1995 Kawasaki 650 Super Sport XI
  • 1995 Kawasaki 650 TS
  • 1995 Kawasaki 650 X2
  • 1996 Kawasaki 650 TS

Liability Disclaimer – Closed Course Use Only

Blowsion products are intended for closed course competition use only. These products are not designed, tested, or approved for use on public waterways or pollution-controlled vehicles.

Installation and operation of Blowsion components may affect the safety, emissions compliance, and legal status of your watercraft. Use of these products on public waterways may be a violation of federal, state, or local laws.

By purchasing and installing Blowsion products, the user assumes all responsibility and risk associated with their use, including but not limited to personal injury, property damage, or legal penalties.

Always follow proper safety procedures and consult with a qualified technician for installation.

Product Installation Disclaimer:

Warning:

When using electric or battery-operated tools inside the hull, ensure the area is well-ventilated and free of fumes. Failure to follow this precaution may result in fire, explosion, serious injury, or death.

Disconnect the battery before performing any installation or maintenance to prevent accidental ignition or electrical shock.

Allow the engine to cool completely before beginning installation.

No Smoking!

This kit is not designed for use on vehicles equipped with pollution control systems. Installing this kit on such vehicles may violate state or local laws

View full details