WORX
WORX Ride Plate - WR307 - Kawasaki 750SX / SXI
WORX Ride Plate - WR307 - Kawasaki 750SX / SXI
SKU:WR307
In stock
Couldn't load pickup availability
This plate is similar to the WR305 for the Superjet in that it replaces the earlier WR303. With the change in IJSBA racing rules several years ago we were able to make a new longer ride plate but unlike most companies that just extended their existing ride plates we took the opportunity to totally redesign the plate. Yes it is longer it also incorporates the now famous “D” cut-out which helps in several ways. Firstly it has a bevelled leading edge on the “D” cut-out that picks up water when the bow of the boat starts to lift under hard acceleration or in rough water, this helps to hold the boat flatter and give you a lot better drive and control. The second major benefit from the “D” cut-out is that it picks up water when you push then boat hard into turns and gives it a lot more stability and less tendency to slide out. The extra length obviously holds the boat a lot flatter also and with the hard chine lines on the edges of the plate makes it a lot easier to carve those really tight turns in complete control. The SX and SXI have always had the porposing problem especially with heavier riders, this plate solves that problem. NOTE: Does not fit SXi-Pro Models.
Part Number: WR307
Liability Disclaimer – Closed Course Use Only
Liability Disclaimer – Closed Course Use Only
Blowsion products are intended for closed course competition use only. These products are not designed, tested, or approved for use on public waterways or pollution-controlled vehicles.
Installation and operation of Blowsion components may affect the safety, emissions compliance, and legal status of your watercraft. Use of these products on public waterways may be a violation of federal, state, or local laws.
By purchasing and installing Blowsion products, the user assumes all responsibility and risk associated with their use, including but not limited to personal injury, property damage, or legal penalties.
Always follow proper safety procedures and consult with a qualified technician for installation.
Product Installation Disclaimer:
Warning:
When using electric or battery-operated tools inside the hull, ensure the area is well-ventilated and free of fumes. Failure to follow this precaution may result in fire, explosion, serious injury, or death.
Disconnect the battery before performing any installation or maintenance to prevent accidental ignition or electrical shock.
Allow the engine to cool completely before beginning installation.
No Smoking!
This kit is not designed for use on vehicles equipped with pollution control systems. Installing this kit on such vehicles may violate state or local laws
Share
