• WORX Ride Plate - WR306 - Kawasaki 750 SXi-Pro / SXR
1 1

WORX

WORX Ride Plate - WR306 - Kawasaki 750 SXi-Pro / SXR

WORX Ride Plate - WR306 - Kawasaki 750 SXi-Pro / SXR

WR306

In stock

$299.00
Shipping calculated at checkout.

This plate was tested by Team Kawasaki and is was their choice for their top riders. Performance Benefit’s This plate is considerably longer then the OEM plate with our trade mark “D” cut in it, the extra length of the plate holds the boat flatter and stops porposing, the “D” cut makes a big difference to the handling in several ways; 1. It helps to hold the boat flatter in rough water and under initial acceleration, as the bow lifts the “D” cut out bites into the water pulling the boat back down which let’s the pump get better hook-up and drive. 2. When you are cornering hard the ‘D” cut out keeps the boat more stable by allowing water to travel over the top of the plate through the cut-out. 18" Length.

Part Number: WR306

Liability Disclaimer – Closed Course Use Only

Blowsion products are intended for closed course competition use only. These products are not designed, tested, or approved for use on public waterways or pollution-controlled vehicles.

Installation and operation of Blowsion components may affect the safety, emissions compliance, and legal status of your watercraft. Use of these products on public waterways may be a violation of federal, state, or local laws.

By purchasing and installing Blowsion products, the user assumes all responsibility and risk associated with their use, including but not limited to personal injury, property damage, or legal penalties.

Always follow proper safety procedures and consult with a qualified technician for installation.

Product Installation Disclaimer:

Warning:

When using electric or battery-operated tools inside the hull, ensure the area is well-ventilated and free of fumes. Failure to follow this precaution may result in fire, explosion, serious injury, or death.

Disconnect the battery before performing any installation or maintenance to prevent accidental ignition or electrical shock.

Allow the engine to cool completely before beginning installation.

No Smoking!

This kit is not designed for use on vehicles equipped with pollution control systems. Installing this kit on such vehicles may violate state or local laws

View full details