1 2

Blowsion

Super Carburetor Base Gasket - Mikuni 46mm/48mm

Super Carburetor Base Gasket - Mikuni 46mm/48mm

01-02-423

In stock

$12.95
Shipping calculated at checkout.

The Super Carburetor Base Gasket fits Mikuni 46mm and 48mm carbs, designed to seal the carb base to the intake manifold with zero fuss. Teflon coated with a metal core for real blow-out protection, this gasket holds up to the abuse of high-RPM, high-vibration two-stroke service.

Higher performance than the OEM paper-type gasket, with a specially processed surface that allows reuse and a metal construction that won't tear when you pull the carbs. Reported to deliver roughly 5x the sealing performance of conventional paper gaskets.

Installation is dead simple: clean both mating surfaces, drop it in, bolt up. No messy gasket sealants, no waiting for anything to cure. Reusable too, so you're not chasing down a new gasket every time you pull the carbs for cleaning, jetting changes, or off-season storage.

Features:

  • Teflon coated with metal core for blow-out protection
  • Metal construction, won't tear during maintenance
  • Reusable, no sealant required
  • ~5x sealing performance vs OEM paper gaskets
  • Fits Mikuni 46mm and 48mm carburetors
  • Holds up to high-RPM two-stroke service

Liability Disclaimer – Closed Course Use Only

Blowsion products are intended for closed course competition use only. These products are not designed, tested, or approved for use on public waterways or pollution-controlled vehicles.

Installation and operation of Blowsion components may affect the safety, emissions compliance, and legal status of your watercraft. Use of these products on public waterways may be a violation of federal, state, or local laws.

By purchasing and installing Blowsion products, the user assumes all responsibility and risk associated with their use, including but not limited to personal injury, property damage, or legal penalties.

Always follow proper safety procedures and consult with a qualified technician for installation.

Product Installation Disclaimer:

Warning:

When using electric or battery-operated tools inside the hull, ensure the area is well-ventilated and free of fumes. Failure to follow this precaution may result in fire, explosion, serious injury, or death.

Disconnect the battery before performing any installation or maintenance to prevent accidental ignition or electrical shock.

Allow the engine to cool completely before beginning installation.

No Smoking!

This kit is not designed for use on vehicles equipped with pollution control systems. Installing this kit on such vehicles may violate state or local laws

View full details