Impros Hooker Impeller - Yamaha 148MM

The Impros Hooker 148mm impeller for the Yamaha is a 3-blade large hub diameter, radial edge design stainless steel impeller designed and intended for Bottom end and “Hook up” for Freestyle and Freeriders on a SuperJet, Blaster, or similar ski that utilizes the 144mm pump and want maximum AIR for tricks.

Designed around maximizing pump efficiency and bottom end, this is a new radial edge design, large hub (75mm), and is set back 3mm. It is a rec finish Yamaha impeller that is compatible with 148mm yamaha pumps. Designed with a steep root angle to load the pump well.

Material is a 17-4 stainless steel cast. Dynamically balanced, comes with our Recreation polish, impeller tool and rubber nose seal.

It is available in a variety of pitches for different engine set ups. The pitches available are 9/15, 10/16, 11/17 and 12/18. These numbers are much different from other impeller pitches you have heard of. While they are very low, and directed at bottom end “Hit”, the root angle, blade length and other geometric differences set the Hooker apart from the others.

The 10/16 and 11/17 Hooker has also been one of the most competitive impellers used for closed course racing limited and spec class Yamaha SuperJets and WaveBlasters.

As stated above, they fit in the 148mm pump, Solas 12 vane pump and Skat-Trak Magnum pumps (with a shim).

Hex tool, rubber nose seal and Impros Hooker sticker included in purchase price. We recommend also buying a Driveshaft holding tool (PN# 06-04-022) as well, for ease of installation.