Impros
Impros Hooker Impeller - Kawasaki 750/800 140MM
Impros Hooker Impeller - Kawasaki 750/800 140MM
SKU:IMK1401016
In stock
Couldn't load pickup availability
The *ORIGINAL* Impros Hooker 140mm impeller for the Kawasaki 140mm pump is a 3-blade large hub diameter, radial edge design rec finished stainless steel impeller designed and intended for Bottom end and “Hook up” for Freestyle and Freeriders on an SXR 800, 750 SXi-Pro, or 750SX that utilizes the 140mm pump and want maximum AIR for tricks.
Designed around maximizing pump efficiency and bottom end, this is a new radial edge design, large hub, and is set back. It is a Kawasaki impeller that is compatible with the 140mm stock pump used in the 750 and 800 SXR. Designed with a steep root angle to load the pump well.
Material is a 17-4 stainless steel cast. Dynamically balanced, and comes with a rec finish, with a rubber nose seal.
It is available in a variety of pitches for different engine set ups. The pitches available are 9/15, 10/16, 11/17 and 12/18. These numbers are much different from other impeller pitches you have heard of. While they are very low, and directed at bottom end “Hit”, the root angle, blade length and other geometric differences set the Hooker apart from the others.
As stated above, they fit in the stock 140mm Kawasaki SXR 800, 750 pump
We recommend also buying a Impeller Shaft Tool (PN# 06-04-021) as well, for ease of installation.
Liability Disclaimer – Closed Course Use Only
Liability Disclaimer – Closed Course Use Only
Blowsion products are intended for closed course competition use only. These products are not designed, tested, or approved for use on public waterways or pollution-controlled vehicles.
Installation and operation of Blowsion components may affect the safety, emissions compliance, and legal status of your watercraft. Use of these products on public waterways may be a violation of federal, state, or local laws.
By purchasing and installing Blowsion products, the user assumes all responsibility and risk associated with their use, including but not limited to personal injury, property damage, or legal penalties.
Always follow proper safety procedures and consult with a qualified technician for installation.
Product Installation Disclaimer:
Warning:
When using electric or battery-operated tools inside the hull, ensure the area is well-ventilated and free of fumes. Failure to follow this precaution may result in fire, explosion, serious injury, or death.
Disconnect the battery before performing any installation or maintenance to prevent accidental ignition or electrical shock.
Allow the engine to cool completely before beginning installation.
No Smoking!
This kit is not designed for use on vehicles equipped with pollution control systems. Installing this kit on such vehicles may violate state or local laws
Share
