Skip to product information
1 of 6

Factory Pipe

Factory Pipe - Yamaha B-Pipe Exhaust Kit

Factory Pipe - Yamaha B-Pipe Exhaust Kit

SKU:01-01-053

Out of stock

Regular price $1,165.00 USD
Regular price Sale price $1,165.00 USD
Sale Sold out
Shipping calculated at checkout.

The Factory Pipe 701 Super Jet comes complete with the exclusive tune-able headpipe, aluminum chamber, tuned exhaust manifold and all required hardware. It is available in both a MOD (FIN701SJ02 - PN# 01-01-054) version chamber or LIMITED (FIN701SJ03 - PN# 01-01-053) version. Fits all years of Super Jet with 701 motor. Will not fit 650 motor Super Jets. Please note that the Superjet Elbow Hose is recommended when running Superjet MOD Chamber B Pipe. This allows connection to the OEM Yamaha or TDR Waterbox.

Models

* LIMITED (Instructions)

* MOD (Instructions)

* Suggested Jetting - Are for 730 feet above sea level on a stock engine with aftermarket flame arrestors. Your specific adjustments may vary depending on engine modifications, fuel, altitude and other variables. Please consult a qualified technician if you are not familiar with tuning your carburetor. These changes must be made prior to running the engine.

  • Main Jet: 135 (130 stock) - https://www.blowsion.com/mikuni-main-jet
  • Pilot Jet: 70 (stock)
  • High speed screw: 1 2 turns out from closed
  • Low speed screw: 1 1/4 turns out form closed
  • Needle & Seat: stock (55 psi)
  • Spring: Stock (95 gram)

PLEASE NOTE: IF FACTORY PIPE EXHAUST SYSTEMS ARE CURRENTLY SHOWING OUT OF STOCK, WE HAVE A ZERO HASSLE POLICY IN PLACE TO GET YOU ONE JUST AS SOON AS FACTORY CAN PROVIDE US WITH MORE INVENTORY.

  • Place your order from our online webstore.
  • No funds will be authorized until we have shipped your Exhaust System.
  • Cancel at any time with no penalty.

AT THIS TIME THERE IS NO ESTIMATED SHIP DATES HOWEVER YOU WILL BE SLOTTED IN BY THE EARLIEST ORDERS FIRST. SHIPMENTS ARRIVE SPORADICALLY WITHOUT NOTICE.

NOTE: The Factory Pipe kits for the Yamaha FX1 (FIN701FX01) have been discontinued. As the only available option, the FX1 customer can modify the Factory Pipe Mod Chamber kit for the Super Jet to fit your Fx1. Please email us for further details if this is your preferred option. This has been the preferred choice of most of our FX1 customers as the Mod chambers are almost identical to the FX1 castings except for some minor clearance fit. The installer must make a relief clearance in the chamber so the chamber will not hit the front motor mount and possibly starter. The Factory Pipe exhaust manifolds are the same between the all 701 motors so an alternative exhaust manifold is not required.

Select
View full details