• ADA Cylinder Head Dome - Kawasaki 750 - KA75
  • ADA Cylinder Head Dome - Kawasaki 750 - KA75
  • ADA Cylinder Head Dome - Kawasaki 750 - KA75
1 3

ADA Racing

ADA Cylinder Head Dome - Kawasaki 750

ADA Cylinder Head Dome - Kawasaki 750

KA7522

In stock

$44.95 $38.21
Sale
Shipping calculated at checkout.
Size

ADA Racing Billet Cylinder Head Dome for Kawasaki 750. Includes compression (OR042) and dome top (OR020) o-rings. Squish relief is 0 @ 81mm with a 4 degree angle. These domes fit ADA Racing standard 750/800 Cylinder Head and ADA Racing original girdled head with the billet brackets.

Sizes / Compression

  • PN# KA7522 - 22cc (210lbs / 110 Octane - add 15lbs for 750SX Models)
  • PN# KA7524 - 24cc (195lbs / 100 Octane - add 15lbs for 750SX Models)
  • PN# KA7526 - 26cc (180lbs / 92 Octane - add 15lbs for 750SX Models)
  • PN# KA7528 - 28cc (165lbs / 91 Octane - add 15lbs for 750SX Models)
  • PN# KA7530 - 30cc (150lbs / 89 Octane - add 15lbs for 750SX Models)

The Kawasaki 750SX (1992-1994) model will have about 15lbs higher compression than the readings shown in the dome drop down above. You will then also need to adjust the octane requirements accordingly. All compression readings are on stock non-ported cylinders at sea level elevation. Cylinder porting will lower compression as well as increase in elevation. Compression will drop approximately 7lbs for every 1000ft increase in elevation. Ported cylinders will affect compression differently depending on how much the opening duration of the exhaust port was increased. On ported cylinders there is no way for us to know what the compression will be without a beginning reference point.

NOTE: Domes are sold individually.

Liability Disclaimer – Closed Course Use Only

Blowsion products are intended for closed course competition use only. These products are not designed, tested, or approved for use on public waterways or pollution-controlled vehicles.

Installation and operation of Blowsion components may affect the safety, emissions compliance, and legal status of your watercraft. Use of these products on public waterways may be a violation of federal, state, or local laws.

By purchasing and installing Blowsion products, the user assumes all responsibility and risk associated with their use, including but not limited to personal injury, property damage, or legal penalties.

Always follow proper safety procedures and consult with a qualified technician for installation.

Product Installation Disclaimer:

Warning:

When using electric or battery-operated tools inside the hull, ensure the area is well-ventilated and free of fumes. Failure to follow this precaution may result in fire, explosion, serious injury, or death.

Disconnect the battery before performing any installation or maintenance to prevent accidental ignition or electrical shock.

Allow the engine to cool completely before beginning installation.

No Smoking!

This kit is not designed for use on vehicles equipped with pollution control systems. Installing this kit on such vehicles may violate state or local laws

View full details