• ADA Cylinder Head Dome - Kawasaki 650 - KA65
  • ADA Cylinder Head Dome - Kawasaki 650 - KA65
  • ADA Cylinder Head Dome - Kawasaki 650 - KA65
1 3

ADA Racing

ADA Cylinder Head Dome - Kawasaki 650

ADA Cylinder Head Dome - Kawasaki 650

KA6528

In stock

$44.95 $38.21
Sale
Shipping calculated at checkout.
Size

ADA Racing Billet Cylinder Head Dome for Kawasaki 650. Includes compression (OR042) and dome top (OR020) o-rings. Squish relief is .015 inch @ 78mm with a 9.5 degree angle. These domes fit the ADA Racing 650 Cylinder Head.

NOTE: Domes are sold individually.

Sizes / Compression

  • PN# KA6528 - 28cc (200-205lbs)
  • PN# KA6530 - 30cc (185-190lbs)
  • PN# KA6532 - 32cc (170-175lbs)
  • PN# KA6534 - 34cc (157-162lbs)
  • PN# KA3535 - 35cc (150-155lbs - Stock)

650 Stock head with the head gasket is 35cc. All compression readings are on a stock, non-ported cylinder, at sea level elevation. There is a 7-10lb compression loss per 1000ft increase in elevation. If you have a ported cylinder, then your compression will also be less, depending on how much the exhaust port opening duration was increased.

Liability Disclaimer – Closed Course Use Only

Blowsion products are intended for closed course competition use only. These products are not designed, tested, or approved for use on public waterways or pollution-controlled vehicles.

Installation and operation of Blowsion components may affect the safety, emissions compliance, and legal status of your watercraft. Use of these products on public waterways may be a violation of federal, state, or local laws.

By purchasing and installing Blowsion products, the user assumes all responsibility and risk associated with their use, including but not limited to personal injury, property damage, or legal penalties.

Always follow proper safety procedures and consult with a qualified technician for installation.

Product Installation Disclaimer:

Warning:

When using electric or battery-operated tools inside the hull, ensure the area is well-ventilated and free of fumes. Failure to follow this precaution may result in fire, explosion, serious injury, or death.

Disconnect the battery before performing any installation or maintenance to prevent accidental ignition or electrical shock.

Allow the engine to cool completely before beginning installation.

No Smoking!

This kit is not designed for use on vehicles equipped with pollution control systems. Installing this kit on such vehicles may violate state or local laws

View full details