1 1

West System

West System Epoxy Resin Kit 105-A/206-A

West System Epoxy Resin Kit 105-A/206-A

21173745

In stock

$104.99
Shipping calculated at checkout.

Pickup available at Blowsion LLC

Usually ready in 2 hours

WEST SYSTEM 105-A Epoxy Resin Bundle with 206-A Slow Epoxy Hardener & 300 Mini Pumps Epoxy Metering 2-Pack Pump Set (3 Items)

CONVENIENT EPOXY BUNDLE contains one can of WEST SYSTEM 105-A Resin (32 fl oz), WEST SYSTEM 206-A Slow Hardener (7 fl oz), and one set of calibrated 300 Mini Pumps. 206 Slow Hardener is a low-viscosity epoxy curing agent for use when extended working time or a longer cure time is needed. It also provides adequate working time at higher shop temperatures.

FEATURES:

  • v105 EPOXY RESIN is a clear, pale yellow, low-viscosity liquid epoxy resin. Blended with 206 Slow Hardener at a 5:1 ratio, it cures to a hard, solid plastic with superior physical properties. It will wet out and bond with wood fiber, fiberglass, reinforcing fabrics and a variety of metals. (206 Slow Hardener is not intended for clear coating.)
  • POT LIFE AT 72°F (22°C) is 20 to 25 minutes. Cures to a solid state in 10 to 15 hours. Cures to maximum strength in 1 to 4 days. Minimum recommended working temperature is 60°F (16°C). Does not contain VOCs and has relatively high flash point and no solvent odor, making it much friendlier to use than styrenated resins.
  • EXCELLENT FOR COATNG OR BONDING, this epoxy is easily modified with WEST SYSTEM fillers, pigments, and additives to suit an enormous variety of construction and repair projects, including fiberglass boat repair, strip kayak and canoe construction. Resin viscosity is approximately 1000 centipoise at 72°F (22°C)
  • INCLUDES CALIBRATED PUMPS that dispense 105 Resin & 206 Slow Hardener at the correct 5-part resin to 1-part hardener mix ratio. One pump stroke of resin for each one pump stroke of hardener yields 0.8 fl oz of the exact 5:1 epoxy mix ratio. These durable polypropylene pumps provide years of dependable service.

Blowsion products are intended for closed course competition use only. These products are not designed, tested, or approved for use on public waterways or pollution-controlled vehicles.

Installation and operation of Blowsion components may affect the safety, emissions compliance, and legal status of your watercraft. Use of these products on public waterways may be a violation of federal, state, or local laws.

By purchasing and installing Blowsion products, the user assumes all responsibility and risk associated with their use, including but not limited to personal injury, property damage, or legal penalties.

Always follow proper safety procedures and consult with a qualified technician for installation.

Product Installation Disclaimer:

Warning:

When using electric or battery-operated tools inside the hull, ensure the area is well-ventilated and free of fumes. Failure to follow this precaution may result in fire, explosion, serious injury, or death.

Disconnect the battery before performing any installation or maintenance to prevent accidental ignition or electrical shock.

Allow the engine to cool completely before beginning installation.

No Smoking!

This kit is not designed for use on vehicles equipped with pollution control systems. Installing this kit on such vehicles may violate state or local laws

View full details