• Inline Fuel Filter 1/4"
1 1

Blowsion

Inline Fuel Filter 1/4"

Inline Fuel Filter 1/4"

01-02-550

Out of stock

$5.75
Out of stock
Shipping calculated at checkout.

Keep your fuel system running clean with this clear inline fuel filter, built for high-volume, low-pressure fuel delivery. The clear PET housing lets you check fuel flow and filter condition at a glance, without pulling the line apart.

Inside, a sintered porous bronze element filters down to 40-70 microns, catching the particles that cause premature carb and injector wear. The housing is E-85 rated, so it holds up fine against standard pump gas, and it's tested to the ANSI/OPEI B71.10-2018 standard for reliability.

Features:

  • Clear PET housing for at-a-glance inspection
  • Sintered porous bronze filter element
  • E-85 compatible, handles ethanol-blended fuel
  • Tested to ANSI/OPEI B71.10-2018 standard
  • Reliable filtration for carbureted fuel systems

Specifications:

  • Connection: 1/4" Hose Barb
  • Filtration: 40-70 Micron
  • Media: Sintered Porous Bronze
  • Housing: Clear PET, E-85 Compatible
  • Flow Rate: 7.0 gal/hr

Liability Disclaimer – Closed Course Use Only

Blowsion products are intended for closed course competition use only. These products are not designed, tested, or approved for use on public waterways or pollution-controlled vehicles.

Installation and operation of Blowsion components may affect the safety, emissions compliance, and legal status of your watercraft. Use of these products on public waterways may be a violation of federal, state, or local laws.

By purchasing and installing Blowsion products, the user assumes all responsibility and risk associated with their use, including but not limited to personal injury, property damage, or legal penalties.

Always follow proper safety procedures and consult with a qualified technician for installation.

Product Installation Disclaimer:

Warning:

When using electric or battery-operated tools inside the hull, ensure the area is well-ventilated and free of fumes. Failure to follow this precaution may result in fire, explosion, serious injury, or death.

Disconnect the battery before performing any installation or maintenance to prevent accidental ignition or electrical shock.

Allow the engine to cool completely before beginning installation.

No Smoking!

This kit is not designed for use on vehicles equipped with pollution control systems. Installing this kit on such vehicles may violate state or local laws

View full details