Blowsion
Blowsion Billet Throttle Lever
Blowsion Billet Throttle Lever
SKU:03-05-201
out of stock / discontinued
Couldn't load pickup availability
CHECK OUT OUR NEW PRO THROTTLE LEVERS!
NOW AVAILABLE IN ONE FINGER AND TWO FINGER VERSIONS.
Machined with the stand-up rider comfort at a premium, our new Blowsion straight pull billet finger throttles are ergonomically designed for premium fit and feel whether you are on the waves or on the buoys. Lever angle is situated to reduce hand and arm fatigue. Delrin bushings eliminate the play common in OEM throttles and provide a smooth throttle pull. All stainless hardware at the hinge point eliminates corrosion and play 100%. No C clips used. Available for all models. Available in anodized Clear, Black, Orange, Red, Blue and Lime Green. Machined to fit 10mm x 1.25 pitch throttle cables. Some PWC models will require a throttle cable adapter (please refer to the list below).
Color Options
- PN# 03-05-201 - Anodized Black (Discontinued --See new Pro Levers)
- PN# 03-05-202 - Anodized Blue (Discontinued --See new Pro Levers)
- PN# 03-05-204 - Anodized Green (Discontinued --See new Pro Levers)
- PN# 03-05-205 - Anodized Orange (Discontinued --See new Pro Levers)
- PN# 03-05-207 - Anodized Red (Discontinued --See new Pro Levers)
- PN# 03-05-208 - Anodized Clear (Discontinued --See new Pro Levers)
- PN# 03-05-210 - Anodized Purple (Discontinued --See new Pro Levers)
Throttle Cable Adapter Fitment Guide
6mm Throttle Cable Adapter is required for the following Models:
- Yamaha Superjet (2021+)
- Yamaha 2-Stroke (All Years)
- Kawasaki 550 (1982-1985)
- Kawasaki 440 (1976-1986)
- Kawasaki 300 (All Years)
- Kawasaki (All Pre 1986)
- HydroSpace (All Years)
- Wet Jet (All Years)
NOTE: Kawasaki 650SX and 750SX (1992-1994) models with 10mm x 1.25 pitch throttle cables do not require an adapter.
8mm Throttle Cable Adapter is required for the following Models:
- Kawasaki SXR 1500 (All Years)
- Kawasaki SXR 800 (All Years)
- Kawasaki 750SXi (All Years)
- Kawasaki 750SXi-Pro (All Years)
- Kawasaki 750SS (1996-2000)
- Kawasaki 750XI (1996-2000)
- Kawasaki STS (1995-1997)
- Kawasaki ZXI (1995-2000)
- Kawasaki STX (1997-2000)
Liability Disclaimer – Closed Course Use Only
Liability Disclaimer – Closed Course Use Only
Blowsion products are intended for closed course competition use only. These products are not designed, tested, or approved for use on public waterways or pollution-controlled vehicles.
Installation and operation of Blowsion components may affect the safety, emissions compliance, and legal status of your watercraft. Use of these products on public waterways may be a violation of federal, state, or local laws.
By purchasing and installing Blowsion products, the user assumes all responsibility and risk associated with their use, including but not limited to personal injury, property damage, or legal penalties.
Always follow proper safety procedures and consult with a qualified technician for installation.
Product Installation Disclaimer:
Warning:
When using electric or battery-operated tools inside the hull, ensure the area is well-ventilated and free of fumes. Failure to follow this precaution may result in fire, explosion, serious injury, or death.
Disconnect the battery before performing any installation or maintenance to prevent accidental ignition or electrical shock.
Allow the engine to cool completely before beginning installation.
No Smoking!
This kit is not designed for use on vehicles equipped with pollution control systems. Installing this kit on such vehicles may violate state or local laws
