• Rule Bilge Pump - 500GPH - Non-Automatic (25DA)
1 1

Rule

Bilge Pump - Rule - 500GPH

Bilge Pump - Rule - 500GPH

06-01-001

Out of stock

$37.95
Out of stock
Shipping calculated at checkout.
  • Higher Flow – optimized impeller to provide greater flow at the same amperage.
  • Built-in Thermal Cut-Off (TCO) – provides added protection for pump and vessel.
  • Back Flow Prevention - reduces the amount of water left over in the bilge, reducing odor and helping keep your bilge cleaner.
  • Hidden Air Vents in the Body – helps prevent air locking in challenging plumbing installations and helps with the check valve.
  • Threaded Discharge - easier installation, easier maintenance.
  • Fully Submersible
  • Easy clean snap lock strainer
  • Silent and vibrationless operation
  • Anti-airlock protection
  • Compact, efficient long life motor
  • Ignition Protected
  • No burn-out when run dry
  • Rust and Corrosion protection
  • Used by leading boatbuilders worldwide
  • Marine Grade Blocked Wiring

Part Number: 06-01-001

Specifications

  • Flow Rate: 500GPH (gallons per hour)
  • Voltage: 12V (dc)
  • Amp Draw: 1.6 (amp)
  • Height: 3.9" (99mm)
  • Width: 2.9" (74mm)
  • Weight: 0.7 (lbs)
  • Port Type: 3/4" (19mm) Hose Barb

Liability Disclaimer – Closed Course Use Only

Blowsion products are intended for closed course competition use only. These products are not designed, tested, or approved for use on public waterways or pollution-controlled vehicles.

Installation and operation of Blowsion components may affect the safety, emissions compliance, and legal status of your watercraft. Use of these products on public waterways may be a violation of federal, state, or local laws.

By purchasing and installing Blowsion products, the user assumes all responsibility and risk associated with their use, including but not limited to personal injury, property damage, or legal penalties.

Always follow proper safety procedures and consult with a qualified technician for installation.

Product Installation Disclaimer:

Warning:

When using electric or battery-operated tools inside the hull, ensure the area is well-ventilated and free of fumes. Failure to follow this precaution may result in fire, explosion, serious injury, or death.

Disconnect the battery before performing any installation or maintenance to prevent accidental ignition or electrical shock.

Allow the engine to cool completely before beginning installation.

No Smoking!

This kit is not designed for use on vehicles equipped with pollution control systems. Installing this kit on such vehicles may violate state or local laws

View full details