NaN -Infinity

Rule

Bilge Pump - Rule - 500GPH Automatic

Bilge Pump - Rule - 500GPH Automatic

06-01-002

In stock

$105.99
Shipping calculated at checkout.

Pickup available at Blowsion LLC

Usually ready in 2 hours

Rule Bilge Pump 25SA, Fully Automatic 500 GPH submersible 12 volt DC bilge pump is used by leading boatbuilders worldwide. It features an easy clean snap lock strainer, silent and vibrationless operation, anti-airlock protection, compact, efficient long life motor, marine grade blocked wiring, ignition protection, no burn-out when run dry and rust and corrosion protection.

Automatic Operation: Pump turns on and checks for water approximately every 2-1/2 minutes. If resistance (water) is found, it will run for as long as water is present. When all the water is pumped out, the pump shuts off and returns to its 2-1/2 minute test cycle. Power use in the checking mode is minimal.

Specifications:

  • Voltage: 12 Volt DC
  • Amp Draw: 1.6 amp
  • Fuse Size: 4 amp
  • Hose Diameter: 3/4" inch
  • Height: 4.2" Inch
  • Width: 2.5" Inch

Part Number: 06-01-002

Blowsion products are intended for closed course competition use only. These products are not designed, tested, or approved for use on public waterways or pollution-controlled vehicles.

Installation and operation of Blowsion components may affect the safety, emissions compliance, and legal status of your watercraft. Use of these products on public waterways may be a violation of federal, state, or local laws.

By purchasing and installing Blowsion products, the user assumes all responsibility and risk associated with their use, including but not limited to personal injury, property damage, or legal penalties.

Always follow proper safety procedures and consult with a qualified technician for installation.

Product Installation Disclaimer:

Warning:

When using electric or battery-operated tools inside the hull, ensure the area is well-ventilated and free of fumes. Failure to follow this precaution may result in fire, explosion, serious injury, or death.

Disconnect the battery before performing any installation or maintenance to prevent accidental ignition or electrical shock.

Allow the engine to cool completely before beginning installation.

No Smoking!

This kit is not designed for use on vehicles equipped with pollution control systems. Installing this kit on such vehicles may violate state or local laws

View full details